Fluke Networks OFP2-100-QI OptiFiber

The Fluke Networks OFP2-100-QI OptiFiber Quad OTDR with Inspection kit is focused on reducing costs while enhancing productivity and improving network reliability. This is the non-wireless version and is available for countries where the WiFi adapter is not certified or for customers who do not wish to receive the WiFi adapter.

The Fluke Networks OFP2-100-QI OptiFiber elevates fiber optic testing with the industry’s only smartphone interface that turns a technician into a fiber expert. The DataCenter OTDR configuration eliminates uncertainty and errors that occur when testing data center fiber. Its ultra-short dead zones enable the testing of fiber patch cords in virtualized data centers. These capabilities, plus the fastest-in-the-industry trace times, make the OptiFiber Pro OTDR a must-have tool.

OFP2-100-QI Features

• First OTDR with a smartphone user-interface
• Industry’s shortest event and attenuation dead zones
• Accelerate fiber certification with the fastest set-up and trace times
• SmartLoop™ technology enables the testing of two fibers in a single test eliminating the need to travel to the far end of the connection to perform tests.
• Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing, and fiber end-face inspection
• Instantaneous bi-directional averaging results included at no charge
• Improve resource utilization with custom configurations for projects and users
• Simplify use with “DataCenter OTDR™” mode and EventMap™ view

Fluke Networks OFP2-100-QI OptiFiber specifications:

Environmental specifications

• Operating temperature* -10 to 45°C
• Storage Temperature -10 to +60°C
• Operating Altitude 4,000 m (13,123 ft)
  3,200 m (10,500 ft) with AC Adapter
• Storage Altitude 12,000 m
  EMC EN 61326-1

General Specifications

• Dimensions Mainframe with module and battery: 2.625 x 5.25 x 11.0″ ( 6.67 x 13.33 x 27.94 cm)
• Battery Lithium-ion battery pack, 7.2 volts
• Battery Life Eight-hour Auto OTDR operation, dual-wavelength, no video probe connected, 150 m of fiber
• Charge Time Tester Off: Four hours to charge from 10% to 90% capacity
• Tester On: Six hours to charge from 10% to 90% capacity
• Wavelengths 850 nm +/- 10 nm
  1300 nm +35/-15 nm
  1310 nm +/- 25 nm
  1550 nm +/- 30 nm
• Compatible Fiber Types 50/125 µm
  62.5/125 µm
  Singlemode

FiberInspector Probe

• Magnification ~200X with OptiFiber Pro Display
• Light Source Blue LED
• Power Source Versiv Mainframe
• Field of View (FOV) Horizontal: 425 µm
• Vertical: 320 µm
• Minimum Detectable Particle Size 0.5 µm

VFL

• On/Off Control Mechanical switch and a button on the touchscreen
• Output Power 316 µW (-5 dBm) = peak power = 1.0 mW (0 dBm)
• Operating Wavelength 650 nm Nominal
• Spectral Width (RMS) ±3 nm
• Output Modes Continuous Wave Pulsed mode (2 Hz to 3 Hz blink frequency)
• Connector Adapter 2.5 mm Universal
• Laser Safety (Classification) Class II CDRH Complies to EN 60825-2