Fluke Networks CFP-100-S CertiFiber Pro

The Fluke Networks CFP-100-S 120 is a CertiFiber Pro SingleMode OLTS Kit. This item should be ordered when you need a CertiFiber Pro SingleMode optical fiber certification kit with a mainframe and remote unit. The Fluke Networks Versiv family of cable testers offers modular solutions for every copper and fiber cable testing application.

CFP-100-S CertiFiber Pro Features

• Three-second Autotest optical loss measurement of two fibers at two wavelengths with distance measurement and optical loss budget calculation
• Provides automatic Pass/Fail analysis to industry standards or custom test limits
• Identifies incorrect test procedures resulting in negative loss readings
• Double-ended Pass/Fail certification of fiber optic connector end faces
• Graphical indication of problem areas on fiber end faces due to contamination, pits, chips, and scratches
• Interchangeable power meter adapters are available for all typical connector types (SC, ST, LC, and FC) to enable the most accurate 1-jumper reference method
• Built-in visual fault locator for basic troubleshooting and polarity determination
• Dual wavelength measurement capability on a single fiber allows the tester to be used in applications that require only one fiber link
• Compliant with TIA-526-14-B and IEC 61280-4-1 Encircled Flux requirements with no additional equipment or procedures

Fluke Networks CFP-100-S CertiFiber Pro Specification

Power Meter Specifications

• Input Connector: Interchangeable connector adapter (LC standard, SC, ST, and FC optional)
• Detector Type InGaAs
• Wavelengths 850 nm, 1300 nm, 1310 nm, 1550 nm
• Power Measurement Range 0 dBm to -65 dBm (850 nm) 0 dBm to -70 dBm (all other wavelengths)
• Power Measurement Uncertainty < +/- 5% +/- 32 pW
• Measurement Linearity < ± 0.1 dB
• Re-calibration Period 1 year

Loss/Length Specifications Specification

• Input/Output Connectors: Interchangeable connector adapter (LC standard, SC, ST, and FC optional)
• Launch Condition Encircled Flux compliant to TIA-526-14-B, ISO/IEC 14763-3 and IEC 61280-4-1
• Source Wavelengths 850 nm, 1300 nm, 1310 nm, 1550 nm
• Power Measurement Range 0 dBm to -65 dBm (850 nm) 0 dBm to -70 dBm (all other wavelengths)
• Power Measurement Uncertainty < +/- 5% +/- 32 pW
• Re-calibration Period 1 year

Environmental Specifications

• Operating Temperature -18° C to 45° C
• Storage Temperature -30° C to +60° C
• Vibration Random, 2 g, 5 Hz-500 Hz
• Shock 1 m drop test with and without module and adapters
• Interfaces I/O USB

Test Equipment General Attributes

• Safety Approval CSA
• Interfaces I/O USB
• Calibration Included Factory Calibration
• Power Supply Voltage Battery Powered
• Country of Origin United States