Fluke CNX 3000 HVAC System

The Fluke CNX 3000 HVAC System lets you work on electrical panels faster, safer, and easier with remote current and temperature modules.

Connect your CNX a3000 AC Wireless Current Clamp Module to your test point, and view the results up to 20 meters away on the CNX Wireless Multimeter. Plus, you can connect the CNX t3000 K-type wireless temperature module and view remote temperature measurements.

You’ll save time, with less run-around collecting multiple measurements. Use multiple modules for measurements on three-phase systems. Or use as a stand-alone measurement tool or combine with other CNX modules as a system for multiple measurements.

From short distances, you can even view readings from modules through closed electrical panels. Plus no more writing down data as the CNX remote modules capture up to 65,000 sets of time-stamped min/max/avg readings, using the optional PC adapter. CNX wireless test tools also offer increased safety by letting you view readings in a separate location from the test point.

similar product

if you are looking for a similar product visit Fluke CNX 3000 Wireless Multimeter.

Fluke CNX 3000 HVAC System Specifications

• Range: 400.0 A
• Resolution: 0.1 A
• Accuracy: 400.0 A:2 % ± 5 digits (10 Hz to 100 Hz)
  2.5 % ± 5 digits (100 Hz to 500 Hz)
• Inrush: Max displayed reading: 999.9A
• Crest factor (50 Hz/60 Hz): 3.0 at 500 A, 2.5 at 600 A, 1.42 at 1000 A, add 2 %
• Display : 3-1/2 digits, LCD w/backlight
• Log rate/interval: 1-sec minimum/adjustable by PC
• Battery type: 2 AA, NEDA 15 A, IEC LR6
• Battery life: 400 hours
• Memory: Record up to 65,000 readings
• RF communications: 2.4 GHZ ISM Band
• RF communication range: 20 Meters
• Operating temperature: -10 °C to +50 °C
• Storage temperature: -40 °C to +60 °C
• Operating humidity : 90 % at 35 °C, 75 % at 40 °C, 45 % at 50 °C
• EMC : EN 61326-1:2006
• Safety compliance: EN/IEC 61010-1-30:2010 to 600 V Measurement Category (CAT) III
  EN/IEC 61010-2-030:2010
  EN/IEC 61010-2-032:2002