Chauvin Arnoux CA6418 Earth clamp

The Chauvin Arnoux CA6418 Earth clamp with oblong head is used to measure earth resistance in electrical installations. This instrument has an oblong-shaped head that can measure the earth resistance of round and flat conductors.

The C.A 6418 earth/ground clamp, which comes with a carrying case, can be used for rapid testing of earth loops of any sort. Its clamping capacity enables measurements on rectangular bars 30 x 40mm and 20 x 55mm in size, as well as cables 32mm in diameter.The C.A 6418 clamp displays both the earth-loop resistance and the leakage current at the same time.

It is particularly easy to use due to ergonomic advancements such as the OLED display, which provides vision over an angle of 180 degrees in all lighting circumstances. When the clamp is opened, the automatic “pre-HOLD” feature and the automatic calibration of the jaw gap upon power-up enable optimised processing of the measurements produced by the C.A 6418 clamp.

The adaptability of the Chauvin Arnoux CA6418 Earth clamp with oblong head is one of its main advantages. This device can be used in a variety of electrical setups, such as residential, commercial, and industrial settings. Furthermore, the device’s oblong-shaped head allows for accurate measurements on round and flat conductors, offering exact readings in a variety of applications. The instrument is also lightweight and simple to use, making it a perfect tool for experts who need to test earth resistance on a regular basis.

More information about the Chauvin Arnoux CA6423 Earth Resistance Tester can be found on MME’s website.

Chauvin Arnoux CA6418 Earth clamp Specifications:

• Wide measurement range from 0.010 Ω to 1200 Ω
• Current from 0.5 mA to 20 A
• Alarms configurable for Ω and A
• Automatic Pre-Hold mode when the clamp is opened
• 300 time/date-stamped measurements
• Automatic calibration of the jaw gap at power-up
• Buzzer and automatic power-off
• Weight:1.2 kg approx. including batteries
• Dimensions:300 x 106 x 56 mm
• Ingress protection:IP 40
• IEC 61010:100 V CAT IV , 150 V CAT III
• Battery life:2,400 x 30 s measurements
• Power supply: 4 x 1.5 V LR6 AA alkaline batteries or 4 NiMH batteries