Tekneka 5210 CO2 Humidity Temperature Datalogger

Tekneka 5210 CO2 Humidity Temperature Data Logger comes with internal sensors, it can measure range 0-10000ppm / 0-100% RH / -30-65°C. Large LCD (3.9 inches) with red backlight warning with a beep sound. The Tekneka-5210 can write up to 22,528 readings and is very easy to output (txt/csv/xls/dlg) without software when connected to a PC via micro-USB.

It allows setting time and date, alarm duration, CO2 limit violation, temperature/humidity threshold, logging interval, and export of report formats. The touch buttons are used to navigate the setup menu, start/stop recording, CO2/humidity/temperature (MAX/MIN/AVG) values, and alarm limits. This precision sensor gives you the exact measured value within 5 seconds of the screen refresh interval. It is powered by 3 1.5V AAA batteries/USB power supply and the display can be turned off for long periods in standby mode.

Tekneka 5210 Datalogger

•  Larger 3.9-inch LCD screen for a better visual experience
• Red backlight warning function when violating CO2 limit It has a huge record storage capacity of 22,528 values read
•  Measurement interval from 5 seconds to 120 minutes
• Generate report without software in a specific format (txt/csv/xls/dlg)
• An audible alarm is available, if exceeded the over-set limit (CO2, ºC, %RH)
• This unit can display the Dew point temperature (Td)
• Better touch response buttons for quick navigation and custom settings
• Automatic keypad lock to prevent accidental interruption
• Displays maximum, minimum, and average readings
• This model can support external temperature/humidity sensor
• It allows calibration of CO2 at 400 ppm by pressing the CAL. button

Accessories

• 5210 Main devices (Internal sensor)
•  Micro-USB cable
•  User manual
•  3 x 1.5V AAA batteries
•  1 Set of Screws and Wall plug