SKF TKBA 40 Belt Alignment Tool

SKF TKBA 40 Belt Alignment Tool

The SKF TKBA 40 is a pulley alignment tool. V-guides and powerful magnets allow the TKBA 40 to be mounted in the pulley grooves. The drawing tool consists of only two components, the laser emitting unit, and the receiving unit, making attaching the drawing tool quick and easy. The 3D target area on the receiver allows you to easily see the misalignment and its nature. Horizontal, vertical, parallel, or a combination of the three.

With simple instructions and an intuitive user interface, the gadget is made to be simple to operate. It can be applied in many different settings, including manufacturing facilities, power plants, and mining activities.

The SKF Belt Alignment instrument TKBA 40 is an effective instrument for making sure that pulleys and belts are properly aligned in industrial applications, which can assist increase productivity, saving downtime, and extend the lifespan of the equipment.

SKF TKBA 40 Features and Benefits

• Powerful magnets allow fast and easy attachment
• Three-dimensional target area simplifies the detection and correction of misalignments
• Facilitates simultaneous adjustment of tension and alignment
• V-guides included for a wide range of V-belt pulleys
• Aligns grooves of a V-belt pulley rather than its face, allowing optimum alignment of pulleys of unequal width or with dissimilar faces
• A special side adaptor for alignments of multi-ribbed and timing belt pulleys as well as sprockets is available as an accessory

SKF TKBA 40 Specifications 

• Type of laser: Red laser diode
• Laser: 1x Built-in class 2 laser, <1 mW, 632 nm
• Laser line length: 3 m at 2 m (9.8 ft at 6.6 ft)
• Measurement accuracy angular: Better than 0,2°
• Measurement accuracy offset: Better than 0,5 mm (0.02 in.)
• Measurement distance: 50 mm to 6 000 mm (2 in. to 20 ft)
• Control: Laser on/off switch
• Housing material: Extruded aluminum
• Dimensions:

• Transmitter unit: 70 x 74 x 61 mm (2.8 x 2.9 x 2.4 in.)
• Receiver unit: 96 x 74 x 61 mm (3.8 x 2.9 x 2.4 in.)
• Reflector dimensions: N/A

• Weight:

• Transmitter unit: 320 g (0.7 lbs)
• Receiver unit: 320 g (0.7 lbs)

• Mounting: Magnetic, groove mounted
• V-guides:
• Size 1: 22 mm, short rods (3x pairs)
• Size 2: 22 mm, long rods (3x pairs)
• Size 3: 40 mm, short rods (3x pairs)
• Size 4: 40 mm, long rods (3x pairs)
• Battery: 2x AAA Alkaline type ICE LR03
• Operation time: 20 hours of continuous operation
• Carrying case dimensions: 260 x 180 x 85 mm (10.2 x 7.1 x 3.3 in)
• The total weight (incl. case: 1.3 kg (2.8 lbs)
• Operating temperature: 0 to 40 °C (32 to 104 °F)
• Storage temperature: –20 to +65 °C (–4 to +150 °F)
• Relative humidity: 10 to 90% RH non-condensing
• IP rating: IP 40
• Calibration certificate: Valid for two years
• Case contents:

• 1x TKBA 40 transmitter unit
• 1x TKBA 40 receiver unit
• 2x AAA batteries
• 4x sizes of V-guides, 3x of each size
• 1x Printed instructions for use
• 1x Calibration certificate

SKF TKBA 40 Accessories

• TKBA G2
• TMEB A2

Related Products 

SKF TKBA 20,SKF TKSA 41,TKBA 10