Siglent SDS2000X-E Series Super Phosphor Oscilloscopes

The new SDS2000X-E Series Super Phosphor Oscilloscopes from SIGLENT come in 200 MHz and 350 MHz bandwidth options. The highest sampling rate for each of them is 2 GSa/s, and the typical record length is 28 Mpts. Its convenient one-button design allows access to the most frequently utilized features.

The Siglent  SDS2000X-E series uses next-generation SPO technology. Thanks to the excellent signal fidelity, the background noise is lower compared to similar products in the industry.

It features a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low vibration, and a waveform capture rate of 400,000 fps (mode) sequence level). It also uses a 256-level intensity rating display function and color temperature display mode not found in other models in this class. Siglent’s latest oscilloscopes support several powerful trigger modes, including serial bus triggering and decoding. Historical waveform recording and sequential triggering enable extensive waveform recording, storage, and analysis.

To get more information please contact us through mme.

Siglent SDS2000X-E Series Features

• 200MHz, 350MHz bandwidth models
• Real-time sampling rate up to 2 GSa/s
• The newest generation of SPO technology
• Waveform capture rate up to 110,000 wfm/s (normal mode), and 400,000 wfm/s (sequence mode)
• Supports 256-level intensity grading and color display modes
• 7-inch TFT-LCD display and 10 one-button menus
• Record length up to 28 Mpts
• Digital trigger system
• Bode plot

Siglent SDS2000X-E Series Specifications

• Acquire System

• Sampling Rate: 2 GSa/s (single channel), 1 GSa/s (two channels)
• Memory Depth: Max 28 Mpts/Ch (single channel), 14 Mpts/Ch(two channels)
• Peak Detect: 1 nsec
• Average Averages: 4, 16, 32, 64, 128, 256, 512, 1024
• Eres Enhance bits: 0.5, 1.5, 2, 2.5, 3
• Waveform interpolation: Sin(x)/x, Linea

• Input

• Channels: 2+EXT
• Coupling: DC, AC, GND
• Impedance: DC 1 MΩ: (1 MΩ ± 2%) || (18 pF ± 2 pF) DC 50 Ω: 50 Ω ± 2%
• Max. Input voltage: 1 MΩ: ≤ 400 Vpk (DC + Peak AC <= 10 kHz) 50 Ω: ≤ 5V rms
• CH to CH Isolation: DC-Max BW :> 40 dB
• Probe attenuation: 0.1X, 0.2X, 0.5X, 1X, 2X, 5X, 10X……1000X, 2000X, 5000X, 10000X, Custom

• To get full specifications of this device check the Datasheet.

Accessories

• USB Cable Standard USB cable
• Passive Probes
• Power Cord
• Quick Start Guide-SDS2KX-E