SEBAKMT HL 7000 Water leak detector

The SEBAKMT HL 7000 Electro-acoustic leak detection system with ground microphone, sensor rod and tracer gas is a cutting-edge technology for detecting and locating breaches in water supply and distribution systems. This system employs three methods: electro-acoustic leak detection using a ground microphone, a sensor rod, and tracer gas. Because of its precision and effectiveness in detecting leaks, the SebaKMT HL 7000 Electro-acoustic leak detection system is a popular choice for water utilities and service providers.

SebaKMT HL 7000 Electro-acoustic leak detection

The ability to detect even the smallest leaks with remarkable precision is one of the advantages of employing the sebakmt leak detection system. The ground microphone can detect the sound of water seeping from underground pipes, while the sensor rod can precisely locate the position of the leak. The tracer gas is utilised to determine the precise location of the leak and differentiate it from other sounds in the area. This technology has the potential to save water utilities a large amount of money by reducing water loss and boosting operational efficiency.

Another advantage of the hydrolux hl 7000 is its non-invasive nature. Unlike other leak detection methods that require excavation or damage to pipes, this technology can detect leaks without causing any damage to the pipes or disrupting the flow of water. This makes it an ideal solution for detecting leaks in sensitive areas, such as parks, historic sites, or areas with high pedestrian traffic.

SebaKMT HL 7000 Electro-acoustic leak detection with ground microphone, sensor rod and tracer gas

Because of its customizable architecture and automatic 360° sensor recording, the HL 7000 ground noise system offers a wide range of possibilities for finding leaks. Thanks to the powerful lithium-ion rechargeable batteries, work assignments lasting more than 10 hours are no problem.

The wind-protected Bluetooth® enabled piezoelectric ground microphone with integrated pre-amplification clearly picks up extremely low leakage frequencies on soft materials such as PVC or PE, as well as high frequencies on steel or cast iron pipes.

SebaKMT HL 7000 Specifications:

• Analysis bandwidth:0 … 4000 Hz
• Operation time:> 10 h
• Operation temperature:-25°C … +70°C
• Display:4,3‘‘ color, touch display
• LEDs: on/off and charge control
• Memory:100 measurements, including audio data (.wav)
• Power supply:Internal rechargeable Lithium-Ion battery(3,6 V / 10000 mAh)
• Operation time:> 10 h
• Charging:5 V / 1500 mA
• Charging time: Ca. 8 h
• Dimensions:200 mm x 95 mm x 45 mm
• Weight:0.6 kg