PCE-DOM10 Dissolved Oxygen Meter

The oximeter is a measuring device for determining the oxygen content both in liquids and in the ambient air. With this oximeter, you can analyze the oxygen level in water in no time and thanks to the built-in temperature sensor, the oximeter can perform automatic temperature compensation.

Thanks to this, the oximeter is also used to analyze the oxygen content in lakes or streams, since strong temperature fluctuations can occur here, which falsify the measurement result. This oximeter is also used in fish farming, for example.

The oxygen meter’s sensors are first dry before being powered on. The supplied electrolyte must be applied to the oxygen meter’s sensors in order to perform a measurement. Even if the membrane is potentially damaged, it may be quickly and easily replaced using the oxygen meter. This guarantees that the oxygen meter can be used again in a relatively short amount of time.

PCE-DOM 10 Features

• Measuring range up to 20 mg / L
• For oxygen analysis
• Temperature compensation up to 50°C / 122°F
• Electrolyte included
• For measurements in liquids and air
• Exchangeable oxygen sensor

PCE-DOM10 Specifications

• Oxygen in liquids

• Measuring range: 0 … 20 mg / L
• Resolution: 0.1 mg / L
• Accuracy: ± 0.4 mg / L

• Oxygen in the air (reference measurement)

• Measuring range: 0 … 100%
• Resolution: 0.1%
• Accuracy: ± 0.7%

• Temperature

• Measuring range: 0 … 50°C / 32 … 122°F
• Resolution: 0.1°C / 0.18°F
• Accuracy: ± 0.8°C / 1.4°F
• Temperature units: °C / °F
• Display: LCD display 29 x 28 mm / 1.1 x 1.1 in
• Temperature compensation: Automatically
• Storage: MIN, MAX
• Automatic shutdown: After approx. 15 minutes
• Operating conditions: 0 … 50°C / 32 … 122°F, < 80% RH
• Power supply: 4 x 1.5V AAA batteries
• Power consumption: Approx. 6.2-mA
• Dimensions: 180 x 40 x 40 mm / 7.1 x 1.6 x 1.6 in
• Weight: Approx. 176 g / < 1 lb

PCE-DOM10 Accessories

• Oxygen probe OXPB-11
• Electrolytic solution OXEL-03
• Oxygen Probe for PCE-DOM Series