PCE DFG N 100TW Torque Meter

The PCE-DFG N 100TW torque wrench tester consists of a handheld measuring device and an external torque transducer. The twist converter is connected to the handset via a 1.5 m / 4.9 ft cable and thus allows installation on a test bench or direct mounting on the test bench.

The supplied torque PCE-DFG N 100TW measuring device has been adjusted so that test measurements can be started immediately.Calibration certificate is available as an option for the torque-measuring device. This certificate is a target/actual comparison against a traceable reference standard and therefore serves as proof of measurement accuracy. The measurement uncertainty of the torque measuring device is only 0.5% of the measuring range. Therefore, the torque measuring device is used as a reference device for testing and adjusting static torque instruments. Screw locking is necessary for dynamic torque.

The torque sensor has a 1/2″ square socket and can perform torque measurements in both rotational directions. With a sampling frequency of 1600 Hz, the torque meter detects torque -The first and peak-peak torque (PEAK) moments (“click”) are displayed separately on the display and can be cleared manually or automatically after a specified time. Thanks to freely adjustable warning values, the torque measuring device can warn the tester about the torque overload tool. if not self-triggered.For more detailed analysis of torque, the provided PC software can be used.

PCE-DFG N 100TW Features

• Left / right torsion measurement
• 1600 Hz sampling rate
• Error limit 0.5% of the measuring range
• PEAK / Hold function
• Graphic display
• PC software
• Power adapter and battery operation possible

PCE-DFG N 100TW Specifications:

DELIVERY SCOPE

• 1 x Torque meter PCE-DFG N 100TW
• 1 x Torque transducer 100 Nm
• 1 x 1.5 m / 4.9 ft sensor cable
• 1 x PC software
• 1 x USB data cable
• 1 x Power supply
• 1 x Carrying case
• 1 x Sensor screw socket
• 1 x Instruction manual