MEGGER VIDAR VACUUM INTERRUPTER TESTER

When a vacuum circuit breaker is commissioned or undergoes routine tests, it is very important to be able to ascertain whether or not the vacuum interrupter is intact before putting it back into operation.VIDAR enables you to check the integrity of the vacuum interrupter quickly and conveniently by means of the known relationship between the flashover voltage and the integrity of the vacuum interrupter.

A suitable test voltage (DC) is applied to the interrupter, and the result is known immediately. VIDAR permits you to select among test voltages from 10 to 60 kV DC. One of these voltages is customized and specified by the customer when ordering. A green lamp indicates the approval of the interrupter. A red lamp indicates that it is defective. Two-hand control and a high-voltage warning lamp enhance safety.

MEGGER VIDAR  SPECIFICATIONS:

Specifications are valid at nominal input voltage and an ambient temperature of +25°C, (77°F). Specifications are subject to change without notice.

Environment

Application field: The instrument is intended for use in medium and high-voltage substations and industrial environments.

Personal safety: Maximum permissible transient. The current through the external load is 12 mA. The maximum discharge time for the internal high-voltage circuit is 0.3 s.

• Temperature Operating : -10°C to +50°C (14°F to +122°F)
• Storage & transport : -40°C to +70°C (-40°F to +158°F)
• Humidity: 5% – 95% RH, non-condensing
• CE-marking : LVD2014/35/EU
• EMC: 2014/30/EU
• RoHS : 2011/ 6 5 / E U

General

• Mains voltage: 115 / 230 V AC (switchable), 50 / 60 Hz
• Power consumption: 69 VA (max)

Dimensions

• Instrument : 250 x 210 x 125 mm (9.8” x 8.3” x 4.9”)
• Transport case : 500 x 410 x 230 mm (19.6” x 16.1” x 9.1”)
• Weight: 6.9 kg (15.5 lbs) 8.4 kg (18.5 lbs) with accessories and transport case.