Megger PCITS2000/2-Relay And Protection Testing

This product is discontinued and is replaced by the Ingvar.

This Primary Current Injection Test Set is rugged, self-contained, and designed for operation by one person.

The Megger PCITS2000/2 is a two-wheeled unit (with a handle).

The test set has a separate hand-held controller connected by an expandable cable. This allows the operator to work close to a protective relay while controlling a test. The maximum output current is 2000 A a.c. at line frequency. By changing the range switch, half the rated output can be obtained at twice the voltage.

Additionally, a separate auxiliary voltage output of 250 V, 2 A a.c. or 125 V, 2 A a.c. is available for testing voltage-operated relay coils or checking the magnetization characteristics of current transformers. All outputs are fully variable and each test set has a nominal duty cycle when delivering full current and voltage. Continuous operation is possible at 40% of the maximum current.

Megger PCITS2000/2-Relay And Protection Testing specifications:

• Current range 20 A to 2000 A (0 to 3 V) 50 Hz/60 Hz
  (Programmable in 10 A steps)
  40 A to 1000 A (0 to 6 V) 50 Hz/60 Hz
  (Programmable in 10 A steps)
• Current accuracy Output ±2.5% of the programmed value
  Note: Motor Variac driven – subject to
  mains variation.
• AC voltage output Auxiliary
  0 to 250 V, 2 A, 50 Hz/60 Hz
  0 to 125 V, 2 A, 50 Hz/60 Hz
• Display Dot matrix L.C.D.
• Current range 20 A to 2000 A (0 to 3 V) 50 Hz/60 Hz
  (Programmable in 10 A steps)
  40 A to 1000 A (0 to 6 V) 50 Hz/60 Hz
  (Programmable in 10 A steps)
• Current accuracy Output ±2.5% of the programmed value
  Note: Motor Variac driven – subject to
  mains variation.
• Timer range 0-600 sec, resolution 0,01 sec
  Accuracy: ±0.1%, ±0.05 sec