KIMO FULLTEST3 Multifunction Tester for the safety of machinery

The innovative KIMO FULLTEST3 Multifunction Tester model has been designed to check the electrical safety of machines and switchgear in full compliance with the IEC/EN60204-1:2006 and IEC/EN61439-1 directives. The device carries out a very large number of tests, which makes it a flexible solution that also meets the tests of other guidelines (e.g. routine tests of the IEC/EN60335-1 guideline) in whole or in part. In addition to continuity, insulation, and protective conductor resistance tests, FULLTEST3 can perform RCD.
tests on general, selective, and time-delayed A, AC, and B devices, as well as line/loop impedance measurements, also with high resolution (with optional IMP57 equipment) earth resistance without RCD -Tripping and leakage current with external transformer connection. To buy KIMO FULLTEST3 Multifunction Tester at the best price in the market, visit the MME website.

KIMO FULLTEST3 FEATURES

• HT Instruments offers a state-of-the-art device to perform all the measurements required by the new standards for panel and machine testing IEC/EN60204-1:2016 and IEC/EN61439–2:2011.
• In addition to the continuity tests of the protective conductor, the insulation, and the dielectric strength, FULLTEST3 allows you to carry out differential tests of type A, AC, and B, general, selective and delayed, line/loop impedance measurements
• also with a high resolution of 0.1 mΩ (with optional IMP57 equipment), measurement of the earth resistance without tripping, and the leakage current using a clamp-on transmitter.

KIMO FULLTEST3 Tester SPECIFICATIONS

• IEC/EN60204-1:2016 Measurements: Power Frequency Dielectric withstand voltage with a test voltage of 1000VAC
• Testing protection against indirect contact: Continuity of protective conductors with test current 200mA, Automatic disconnection of the supply (RCD, MCB, Fuse)?, RCD tripping (RCD AC, A, B) up to 1A on TT Systems, Magneto-thermal protections (MCB curve verification on B, C, D, K) and fuses (gG, aM) on TN Systems
• Insulation resistance measurement with test voltage of 500VDC, Discharging of residual voltage V<60V in 5sec/1sec
• IEC/EN61439-1-2:2011 Measurements: Clearances and Creepage distances/ Dielectric withstand voltage with a test voltage of up to 3400/5100VAC, Continuity of earth system and protective conductors ≥10A
• Power Frequency Dielectric withstand voltage with a test voltage of 1800VAC, Alternative power-frequency voltage test up to 5100VAC,
• Test on enclosures of insulating material: Dielectric Withstand voltage with test voltage up to 2835V, Discharging of residual voltage V<60V in 5sec/1sec
• Functions: Continuity of protective circuit with 200mA, Continuity of protective circuit with I>10A, V<12V
• Continuity of protective circuit with I>25A, V<12V
• Insulation with test voltages 100, 250, 500, and 1000VDC, Dielectric strength with voltage programmable from 250V to 5100VAC, Discharge time/residual voltage on plugs and internal circuits
• Absorbed/leaked current and power at the plug of machines
• Tripping time/current of type A, AC, B General and Selective RCDs up to 1000mA
  Contact Voltage
• Line/Loop impedance and Ipsc calculation, Line/Loop impedance with high resolution (with optional accessory IMP57), Non-trip earth resistance, Leakage current (with optional accessory HT96U), Phase sequence, Timer, and limit thresholds selectable through programmable ramps
• USB interface Collegamento ad accessori opzionali, Provided PC interface with software for Windows
• Guidelines: CEI 64-8, CEI 64-8/7, CE MARK, EMC 2014/30/EU, EMC: IEC/EN61326, EN50106
• IEC/EN60204-1, IEC/EN60598-1, IEC/EN61010-1, IEC/EN61187, IEC/EN61335-1, IEC/EN61439-1
• IEC/EN61439-2, IEC/EN61557-1, IEC/EN61557-13, IEC/EN61557-14, IEC/EN61557-2, IEC/EN61557-3
• IEC/EN61557-4, IEC/EN61557-6, IEC/EN61557-7, LVD 2014/35/EU, UNE20460