KIMO COMBI421 Multifunction installation tester

The EVSE KIMO COMBI421 Multifunction installation tester multifunction device for electrical safety testing, power quality analysis, and safety testing performs electrical installation tests according to the IEC/EN 61557-1 standard and then measures the continuity of the protective conductor, resistance insulation value (with PI and DAR calculation), earth resistance, tripping time and current of type B, A and AC RCDs, line impedance/fault with a calculation of expected short circuit/fault current, phase sequence and compliance.

The COMBI521 can also measure and record environmental parameters (illuminance, temperature), leakage currents, and electrical quantities such as voltage, current, power factor, power, and harmonics in single-phase systems. To buy a KIMO COMBI421 installation tester with the best price and quality, refer to our experts.

KIMO COMBI421  tester FEATURES

• COMBI421 performs electrical installation tests according to the IEC/EN 61557-1 standard, i.e. H. Total earth resistance measurements, tests of Type A and AC differential devices up to 1A rated current, insulation, continuity, and short-circuit circuit.
• enables measurement and recording of environmental parameters (illuminance, temperature), leakage currents and electrical quantities, active power, harmonics, and power factor in single-phase networks, and finally allows checking off the order of phases with a single cable.
• Internal memory allows measurements to be stored for later transfer to a PC via a serial connection.
• The device is equipped with the innovative AUTO function: by selecting this function and setting only the RCD current value, the COMBI421 connected to the mains socket performs total earth resistance, RCD, and insulation tests in sequence.
• When the test is complete, the device will display all the results and indicate whether the test passed or failed with simple OK or FAIL symbols.

KIMO COMBI421 SPECIFICATIONS

• Functions: AUTO test (Non-trip ground resistance, RCD, Insulation) in sequence, TRMS
• Insulation with voltage 50, 100, 250, 500, and 1000VDC, Continuity of protective conductors with 200mA
• Tripping time and current of RCDs type B, A, AC Standard, Selective, and Delayed up to 1A Only A, AC general and selective
• Non-trip earth resistance, Loop/Line impedance, Phase-Phase, Phase-Neutral, Phase-PE
• Loop/Line impedance Phase-Phase, Phase-Neutral, Phase-PE with high resolution (0.1mΩ) With optional
• accessory IMP57, Contact voltage, Phase sequence, Leakage current with an optional clamp meter
• Measurement of Voltage, Current, Active, Reactive, Apparent Power, Measurement of Cosphi, Power Factor
• Voltage and current harmonics up to the 49th with THD 49th, Measurement of environmental parameters (°C,°F, %RH, Lux), Test with remote lead PR400, Help online on the display, Internal memory for measured data saving, Optical/USB serial port for PC connection
• Size (LxWx H) (mm) 222x162x57, Weight in grams (batteries included) 1200, Protection category CAT III 240V
• Guidelines: 17th edition, CEI 64-8, CEI 64-8 612.2, CEI 64-8 612.3 .4 .5, CEI 64-8 612.6.1, CEI 64-8 612.6.2
• CEI 64-8 612.6.3, CE MARK, DPR 462 del 22/10/2001, EMC 2014/30/EU
• EMC: IEC/EN61326, IEC/EN61010-032, IEC/EN61010-1, IEC/EN61557-1, IEC/EN61557-2
• IEC/EN61557-3, IEC/EN61557-4, IEC/EN61557-6, IEC/EN61557-7, LVD 2014/35/EU
• UNE20460, VDE 0100