HIOKI PW3360 CLAMP ON POWER LOGGER

HIOKI Clamp On Power Meters are multi-channel power measuring devices utilizing clamp sensor input to accurately and safely measure power on single-phase to three-phase lines. The PW3360 compact 3-Phase 4-Wire energy loggers monitor power demand and other power parameters to aid in energy audits and validate energy saving measures.

An optional clamp-on leakage sensor supports measurements as low as 50 mA.
Broadly applicable for many jobs, including leakage current measurement.

Measure up to 780V with a 1000V display range
Store months of data on SD cards.

Demand Graph Display
Shows the demand value transitions useful for managing power consumption. Check maximum demand values and times while recording.

Trend Graph Display
From all measurement items, select one for display.
Check states such as power fluctuations of devices in on-site operating conditions.
* Except for demand and harmonics

In severe temperature environments

The operating temperature range extends from –10°C (14°F) to 50°C (122°F).
Even under battery operation, measurements can be performed from 0 °C (32°F) to 40°C (104°F)
(0°C (32°F) to 50°C (122 °F) when using LAN communication).

HIOKI PW3360 CLAMP ON POWER LOGGER SPICIFICATION

• Measurement line & number of circuits : 50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 channels
• Voltage ranges : 600 V AC (Effective measurement range: 90.00 V to 780.00 V)
• Current ranges : 500.00 mA to 5.0000 kA AC (depends on current sensor in use),50.000 mA to 5.0000 A AC (Leak clamp on sensor only)
• Power ranges : 300.00 W to 9.0000 MW (depends on voltage/current combination and measured line type)
• Basic accuracy : Voltage : ±0.3% rdg. ±0.1% f.s
  Current : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy
  Active power : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy (at power factor = 1)
• Display update rate : 0.5 sec (except when accessing SD card or internal memory, or during LAN/USB communication)
• Save destination : SD memory card, or internal memory at real time
• Data save interval : 1 sec to 30 sec, 1 minute to 60 minutes, 14 selections
• Save items : Measurement value save: Average only / Average, Max./Min. value, [PW3360-21 only]: Harmonic data save: Average only / average, max./min. value in binary format, Screen copy: BMP form (saved every 5 min. at minimum interval time), Waveform save: Binary waveform data.
• Functions : Connection check, Quick Set navigation guide, clock, pulse input
• Power supply : AC Adapter Z1006: (100 to 240 V AC, 50/60 Hz), 40 VA (including AC adapter)
  Battery Pack 9459: (DC 7.2 V, 3 VA, charging time 6 hr 10 m), 8 hours of continuous use (with back light off)
• Dimensions and mass : 180 mm (7.09 in) W × 100 mm (3.94 in) H × 48 mm (1.89 in) D, 550 g (19.4 oz) without PW9002, 180 mm (7.09 in) W × 100 mm (3.94 in) H × 67.2 mm (2.65 in) D, 830 g (29.3 oz) with PW9002
• Accessories : Voltage cord L9438-53 ×1 set, AC adapter Z1006 ×1, USB cable ×1, Instruction manual ×1, Measurement guide ×1, Color clip ×1 set: red, yellow, blue, white/two each, for color-coding clamp sensors, Spiral tubes for grouping clamp sensor cords ×5