HIOKI LAN CABLE HiTESTER 3665

The Hioki 3665 is a handheld LAN cable tester to easily tests wire maps, measure cable length and identify twisted-pair cables, and is useful for verifying connections after installing connectors on cables. Optional terminators that facilitate easy identification of multiple cables make the LAN cable tester especially convenient for testing cables in working networks in the event of faults caused by open- or short-circuited cable wiring.

HIOKI LAN CABLE HiTESTER 3665 SPECIFICATION:

• Measurable cables: Twisted-pair cable
  100 Ω characteristic impedance, shielded and unshielded, CAT 3, 4, 5, 5e, 6 and 6A
• Compatible connectors: RJ-45 plugs
• Measurement Items
  [Wiremap]: Wiring condition and shielding can be confirmed using the HIOKI TERMINATOR 9690
  Detectable errors: open, short, reversed, transposed, split pairs, and other miswiring
• [Cable Length]: Measurable lengths: 2 m to 300 m, 6.6 ft to 984 ft
  Measurement accuracy: ±4% rdg. ±1 m, ±4% rdg. ±3.3 ft (condition of regulation: single wire)
  Display resolution: 0.1 m
• [Destination]: Up to 21 cables can be identified using the supplied TERMINATOR 9690 and optional Models 9690-01 to 9690-04 to test multiple cables simultaneously
• Display: 128 × 64 dot matrix LCD (with backlight)
• Functions: Auto Backlight: pressing a button turns the backlight on (it turns off automatically after about 20 seconds)Beeper: sounds when pressing buttons and when measurement results are displayed
  Energy-Saving Mode: enter into energy-saving mode after measurement (and resume when the TEST button is pressed)Auto Power Save: the 3665 turns off automatically about 10 minutes after the last button press
  Battery Check: The battery indicator blinks when the voltage falls below 2.4 V, Unit Switch: Select between meters or feet
• Compliance Standards: Safety Standard: EN61010 Pollution Level 2 EMC Standard: EN61326 Allowable Input 3.3 V peak (between RJ-45 pins)
• Operating Temperature & Humidity : 0 to 40 °C, 80% RH or less, non-condensating
• Storage Temperature & Humidity : –10 to 50 °C, 80% RH or less, non-condensating
• Power supply : LR6 (AA) alkaline batteries × 2
• Maximum Power Consumption: 1.4 VA
• Operating Time: Approx. 50 hours (measuring once per minute)
• Dimensions and mass: Approx. 85 mm (3.35 in) W × 130 mm (5.12 in) H × 33 mm (1.30 in) D, approx. 160 g (5.6 oz)