Fluke 729 Pro 7M Automatic Pressure Calibrator 1000 psi
The Fluke 729PRO 7M Automatic Pressure Calibrator is designed to significantly simplify the pressure calibration process, providing fast and accurate results. This calibrator features an internal electric pump that automatically reaches the target pressure, eliminating the need for manual pumping and adjustment.
MME Shopping Event
Hurry and get discounts on Most of MME Products up to 20%
Call for Price
Fluke 729 Pro Automatic Pressure Calibrator 1000 psi
The Fluke 729PRO 7M Automatic Pressure Calibrator is designed to significantly simplify the pressure calibration process, providing fast and accurate results. This calibrator features an internal electric pump that automatically reaches the target pressure, eliminating the need for manual pumping and adjustment. It can automatically generate and regulate pressure up to 1000 psi or 7 MPa, making it a versatile tool for a wide range of applications.
Key features of the Fluke 729 PRO 7M include replaceable pressure control modules, allowing for easy switching between pressure ranges without needing a new device. This enhances its accuracy over a broad pressure spectrum. The device also offers fast achievement of high-pressure setpoints and includes built-in test templates for one-button documented calibration. For enhanced functionality, it supports HART communication, enabling basic setups and adjustments for HART pressure transmitters.
The calibrator is designed for portability and ruggedness, with a powerful Li-ion battery for extended use. Its bright dual-three-channel/color graphic display facilitates easy monitoring and analysis. It’s particularly suitable for use in process industries, by third-party commissioning contractors, field calibration specialists, and a wide array of technicians in sectors like pharmaceuticals, refineries, and manufacturing.
For documentation and compliance with quality and regulatory requirements, the Fluke 729 PRO 7M can automatically test multiple pressure points and document the results, integrating seamlessly with DPCTrack2 calibration management software for a comprehensive calibration and asset management solution.
Fluke 729 pro 4M Features
- Automatic pressure generation and regulation to 1000psi
- Replaceable pressure control modules
- Built-in test templates, one-key calibration
- HART communication
- Pressure leakage testing
- Automatic fine-pressure adjustment, automatic pressure stabilization
- Powerful, replaceable Li-ion battery
- Quick pressure release valve with a muffler
- Extend measurement range with 750P Series pressure modules
- Measure temperature with 720RTD probe
- Bright dual-three-channel /color graphic display
- Weight <5kg
- Rugged and portable design with standard 3-year warranty
- Absolute and gage pressure modules up to 7MPa.
- Use the modules to change the Fluke 729Pro to a different output pressure range
Specifications:
Key parameters | 729 Pro 7M | 729 Pro 4M |
Pressure control range | -13 to 1000 psi, -90 to 7000 kPa, -0.90 to 70 bar | -13 to 600 psi, -90 to 4000 kPa, -0.90 to 40 bar |
Pressure type | Gauge/absolute (Depends on the type of internal or external pressure module | |
Pressure accuracy and Control stability | 0.02% of FS, 0.005% of FS | |
Replaceable pressure measurement modules | Yes, 6 modules | Yes, 4 modules |
mA sourcing/measurement | Yes | |
Voltage measurement | Yes | |
Loop power | 24 V dc | |
Pressure switch testing | Yes | |
Pressure leakage testing | Yes | |
HART Communication | Yes, basic commands supported | |
Autostep / auto ramp | Yes (with customizable speed, mode and style) | |
Battery | Rechargeable lithium battery with charge indication (charged in the instrument or separately) | |
Language | English |
Electrical specification | |
All specifications are valid to 110% of range, except 24 mA source and simulate which are valid to 100% of range. | |
Ranges | |
mA measure, source and simulate | 0 mA to 24 mA |
Volts dc measurement | 0 V dc to 30 V dc |
Resolution | |
mA dc source, simulate and measure | 1 μA |
Voltage dc measurement | 1 mV |
Accuracy | 0.01% FS ±2 LSD all ranges (at 23 °C ±5 °C) |
Stability | 20 ppm FS /°C (-10 °C to +18 °C and 28 °C to 50 °C) |
mA simulation working voltage | 12 V dc to 30 V dc |
Loop compliance voltage | 24 V dc @ 20 mA |
Temperature measurement , 100 Ω Pt(385) RTD | -50 °C to 150 °C |
Temperature resolution | 0.01 °C |
Temperature accuracy | ±0.1 °C ±0.25 °C combined uncertainty when using 720 RTD probe (optional accessory) |
Drive capability (mA source) | 1200 Ω (without HART resistor), 950 Ω (with internal HART resistor) |
Mechanical specification | |
Dimension (HxWxL) | 290 x 215 x100 mm, (4.3 x 4.4 x 9.4 in) |
Weight | 4.9 kg, (10.8 lbs) |
Environmental specification | |
Operating temperature | -10 °C to 50 °C |
Pressure control | 0 °C to 50 °C |
Battery charging | 0 °C to 40 °C |
Storage temperature | -20 °C to 60 °C |
Operating altitude | <3000 m |
Storage altitude | <13000 m |
Operating humidity | Non-condensing (<10°C) ≤90 % RH (10 °C to 30 °C) ≤75 % RH (30 °C to 40 °C) ≤45 % RH (40 °C to 50 °C) |
Pressure Module Selection Table | ||||||
Pressure module | Pressure type | Range | Resolution | Overall uncertainty | 729Pro 4M | 729Pro 7M |
FLK-PMM-200K | Gauge | (-15 to 30) psi | 0.0001 psi | 0.02 % FS / year, maximum | • | • |
(-100 to 200) kPa | 0.001 kPa | |||||
(-1 to 2) bar | 0.00001 bar | |||||
FLK-PMM-200KA | Absolute | (0 to 30) psi | 0.0001 psi | 0.05 % FS / year, maximum | • | • |
(0 to 200) kPa | 0.001 kPa | |||||
(0 to 2) bar | 0.00001 bar | |||||
FLK-PMM-2000K | Gauge | (-13 to 300) psi | 0.001 psi | 0.02 % FS / year, maximum | • | • |
(-90 to 2000) kPa | 0.01 kPa | |||||
(-0.90 to 20) bar | 0.0001 bar | |||||
FLK-PMM-4000K | Gauge | (-13 to 600) psi | 0.01 psi | 0.02 % FS / year, maximum | • | • |
(-90 to 4000) kPa | 0.01 kPa | |||||
(-0.90 to 40) bar | 0.0001 ba | |||||
FLK-PMM-7000K | Gauge | (-13 to 1000) psi | 0.01 psi | 0.02 % FS / year, maximum | • | |
(-90 to 7000) kPa | 0.01 kPa | |||||
(-0.90 to 70) bar | 0.0001 ba | |||||
FLK-PMM-7000KA | Absolute | (0 to 1000) psi | 0.01 psi | 0.02 % FS / year, maximum | • | |
(0 to 7000) kPa | 0.01 kPa | |||||
(0 to 70) bar | 0.0001 ba | |||||
Dry air or non-corrosive gases only / 15 °C to 35 °C, all ranges |
Fluke 729 Pro 7M Include:
- FLK-PMM-7000K
- FLK-PMM-200K (Optional)
- FLK-PMM-200KA (Optional)
- FLK-PMM-2000K (Optional)
- FLK-PMM-4000K (Optional)
- FLK-PMM-7000KA (Optional)
You must be logged in to post a review.
Brand
Fluke
Fluke Corporation
Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. Typical customers and users include technicians, engineers, metrologists, medical-device manufacturers, and computer network professionals — people who stake their reputations on their tools, and use tools to help extend their personal power and abilities.Specifications
Related Products
Fluke 729 300G Automatic Pressure Calibrator
In stock
Fluke 719Pro 150G Electric Pressure Calibrator
In stock
Reviews
Clear filtersThere are no reviews yet.