Fluke 718 1G Pressure Calibrator

The complete solution to pressure calibration

The Fluke 718 1G Pressure Calibrator provides a total pressure calibration solution for transmitters, gauges, and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy-to-clean pump helps protect it from damage and provides the ability to service the pump without disassembly, even in the field.

With an easy-to-use error % calculation you can make pass/fail decisions quickly. Meaning you can make decisions in the field without having to analyze the results later. The min/max/hold function also makes it easy to capture changing measurements for comparison or documentation.

The integrated pressure switch test function, and best-in-class mA accuracy (0.015%) provide a high level of measurement confidence and even broader workload coverage.

Fluke 718 Pressure Calibrator specifications:

Fluke 718 Series

• Measure pressure : (Internal sensor)
• Accuracy: 0.025% full scale
• Functions: Zero, min/max, hold, damp
• Dry air, non-corrosives only

Fluke 718 1G

• Range : -1 psi to +1 psi, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa)
• Resolution: 0.0001 psi, 0.001 mbar, 0.0001 kPa
• Overpressure : 5x Full Scale
• Functions: Zero, Min, Max, Hold, Damp
• Fluke 718 30G
• Range: -12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa)
• Resolution: 0.001 psi, 0.1 mbar, 0.01 kPa
• Overpressure : 5x Full Scale
• Functions: Zero, Min, Max, Hold, Damp
• Range: -12 psi to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)
• Resolution: 0.01 psi, 0.1 mbar, 0.01 kPa
• Overpressure : 2x Full Scale
• Functions: Zero, Min, Max, Hold, Damp

Fluke 718 Series Via Built-in Pump

• Range : -12 psi or -850 mbar to full scale Supported Pressure Units; psi, inH₂0 (4°C), inH₂0 (20°C), cmH₂0 (4°C), cmH₂0 (20°C), bar, mbar, kPa, inHg, mmHg, kg/cm
• Loop power range: 24 V DC
• Accuracy: ±10%
• mA Measure
• Range : 0 mA to 24 mA
• Resolution: 0.001 mA
• Accuracy : 0.015% + 1 count
• General Specifications
• Maximum voltage: 30 volts (non-operating)
• Temperature : -40°C to 60°C
• Operating temperature : -10°C to 55°C
• Relative humidity : 95% (10°C to 30°C); 75% (30°C to 40°C); 45% (40°C to 50°C); 35% (50°C to 55°C)
• Operating altitude: 3,000 M max
• Shock: 1 M drop test
• Vibration: Random, 2 g, 5 Hz – 500 Hz
• Safety: CSA C22.2 No. 1010.1: 1992
• EMC : EN50082-1: 1992 and EN55022: 1994 Class B
• Size : 216 x 94 x 66 mm (8.50 x 3.72 x 2.60 in)
• Weight: 992 g (35 oz)
• Power, battery life : 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718
• Battery life: 4 to 20 hours typical, depending on functions used
• Warranty: Three years (one year on pressure pump in Fluke 718)
• Display: LCD, 5-digit pressure, and current simultaneous

For use with non-corrosive gasses