Elcometer 319 Dewpoint Meter

Elcometer’s 319 Dew Point Meter is a tough instrument made to measure and record all pertinent climatic factors needed to decide whether the environment is acceptable for painting.

With embedded magnets that enable the gauge to be connected to a substrate during remote recording, the Elcometer 319 Dew Point Meter offers both manual and automatic data logging in one gauge1. It makes measuring climatic conditions simple and quick because of its quick response time and clear menu structure.

For usage in paint booths, adjustable limits that set off visible and aural alerts if a limit is exceeded can be set for each measurement parameter.

The adaptable gauge can be used as a thermometer by attaching external probes; this makes it perfect for determining the temperature of paint before application and for determining the surface temperature during remote logging.

The versatile Elcometer 319 Dew Point Meter is able to measure and record the following climatic parameters:

• Relative humidity
• Air temperature
• Surface temperature
• Dewpoint temperature
• TΔ (the difference between surface temperature and dewpoint)
• Dry Bulb temperature
• Wet Bulb temperature
• External temperature correction (K-type)
• Specific humidity

Elcometer 319 Dewpoint Meter Features

• Rapid response time
• Each gauge can be powered by either 2 x AA batteries (for up to 400 hours1use) or directly via the USB cable
• Adjustable limits can be set for each measurement parameter which triggers visual and audible alarms whenever a limit is exceeded
• Intelligent memory calculates the total available logging time when using batches
• Gauges can be recertified at Elcometer Authorised Service Centres
• The Elcometer 319 Dewpoint Meter meets International Standards including ISO 8502-4
• Supplied with a Calibration Certificate
• All readings are time & date stamped

Elcometer 319 Specifications

Model	Model S	Model T	Certificate
Part Number	G319—-S	G319—-T
Reading Parameters – RH, Ta, Ts (Te6), Td, TΔ, Tdb, Twb1, SH1
Statistics – number of readings, standard deviation, mean, coefficient of variation, minimum, maximum
Dustproof & waterproof with fully sealed sensors – equivalent to IP66
Integral Magnets – secure the gauge during logging
High/Low Limits – audible, visual, red/green LED alarms can be set against any or all parameters
Multilingual Menus
Backlight – user selectable
K-Type Connector for external probes
Memory – with reading and statistic review	Last 10 records	25,000 records in 999 batches
Manual Logging
Interval Logging2		Adjustable between 1 second and 24 hours
*Data Output*
USB
Bluetooth® to computer, Android™ & iOS4 devices
ElcoMaster® software & USB cable
	Temperature Range	Accuracy	Resolution
Gauge5	-20 to +80°C (-4 to +176°F)	±0.5°C (±1°F)	0.1°C (0.1°F)
Air Temperature (Ta)	-20 to +80°C (-4 to +176°F)	±0.5°C (±1°F)7	0.1°C (0.1°F)
Surface Temperature (TS)	-20 to +80°C (-4 to +176°F)	±0.5°C (±1°F)	0.1°C (0.1°F)
External K-Type Thermocouple (Te)	-40 to +200°C (-40 to+392°F)	±0.5°C (±1°F)6	0.1°C (0.1°F)
Relative Humidity (RH)	0 to 100%RH	±3%RH3	0.1%
Gauge & LCD Operating Range	-20°C to +80°C (-4°F to +176°F)
Power Supply	2 x AA batteries or via USB Cable
Battery Life	Manual Mode: Greater than 40 hours (Backlight Off) Interval Logging: up to 400 hours (1 reading every 10 minutes)
Dimensions	180 x 75 x 35mm (7 x 3 x 1.4”)
Weight	300g (0.66lb)
Packing List	Elcometer 319 Dewpoint Meter, 2 x AA batteries, wrist strap, carry case, calibration certificate, USB cable8, ElcoMaster®8, and operating instructions

Accessories

• Liquid Temperature Probe; -200 to +1100°C (-328 to +2012°F)
• Magnetic Surface Temperature Probe; -40 to +80°C (-40 to +176°F)
• USB Cable
• Wrist Strap
• Protective Carry Case/Pouch